----------------------------Original message----------------------------


----------
> From: Peggy B Ottens <<a href="/scripts/wa.exe?LOGON=A3%3Dind9805%26L%3DARLIS-L%26E%3D7bit7BIT%26P%3D30927%26B%3D--%26T%3Dtext%252FplainTEXT%252FPLAIN%3B%2520charset%3DUS-ASCII%26pending%3D" target="_parent" >[log in to unmask]</a>>
> To: Rebecca D. Steel <<a href="/scripts/wa.exe?LOGON=A3%3Dind9805%26L%3DARLIS-L%26E%3D7bit7BIT%26P%3D30927%26B%3D--%26T%3Dtext%252FplainTEXT%252FPLAIN%3B%2520charset%3DUS-ASCII%26pending%3D" target="_parent" >[log in to unmask]</a>>
> Subject: Re: slide labels
> Date: Thursday, April 30, 1998 8:58 AM
>
> Hi Rebecca-
>
> Just a quick note-  the foilbacks do come in pinfeed, either 1 across
> or 4 across, as you wish.  I used to use these with a dot matrix
> printer.  Don't labels are still the worst for removal. I think they
> bond to the plastic!On Wed, 29 Apr 1998, Rebecca D. Steel wrote:
>
> > Dear Peggy : Thank you so much for your detailed, informative reply.
This
> > helps tremendously & confirms what David Ziegler at UCLA recommended.
He
> > mentioned GEPE mounts had become troublesome after adding a
"plasticizer"
> > to the plastic of the mounts, which causes other labels to lose
adhesive
> > quality,unless of "pharmaceutical grade". Will investigate getting
similar
> > labels for pinfed printer. Thank you for taking the time to provide us
with
> > the details for the correct labels. The Listserv is proving to be a
> > goldmine. Sincerely,
> >
> > Rebecca D. Steel, Librarian
> > Kalamazoo Inst. of Arts Library
> > 314 S. Park St.
> > 97-98 temp. address: KIAnnex, 458 W. South St.
> > Kalamazoo, MI  49007-5102
> > (616) 349-7775
> > FAX: 349-9313
> > email: <a href="/scripts/wa.exe?LOGON=A3%3Dind9805%26L%3DARLIS-L%26E%3D7bit7BIT%26P%3D30927%26B%3D--%26T%3Dtext%252FplainTEXT%252FPLAIN%3B%2520charset%3DUS-ASCII%26pending%3D" target="_parent" >[log in to unmask]</a>
> > http://www.kia.iserv.net
> >
> > ----------
> > > From: Peggy B Ottens <<a href="/scripts/wa.exe?LOGON=A3%3Dind9805%26L%3DARLIS-L%26E%3D7bit7BIT%26P%3D30927%26B%3D--%26T%3Dtext%252FplainTEXT%252FPLAIN%3B%2520charset%3DUS-ASCII%26pending%3D" target="_parent" >[log in to unmask]</a>>
> > > To: Rebecca D. Steel <<a href="/scripts/wa.exe?LOGON=A3%3Dind9805%26L%3DARLIS-L%26E%3D7bit7BIT%26P%3D30927%26B%3D--%26T%3Dtext%252FplainTEXT%252FPLAIN%3B%2520charset%3DUS-ASCII%26pending%3D" target="_parent" >[log in to unmask]</a>>
> > > Subject: Re: slide labels
> > > Date: Wednesday, April 29, 1998 9:15 AM
> > >
> > > Hi Rebecca-
> > >
> > > We have been using foil-back labels from Univeristy roducts.  I use
cat#
> > > 387-2520 which are 8x11 sheets of 80 labels.  I print theese on an
> > > inkjet but they are really laser labels.  We have been using them for
> > > over 10 years on GEPE mounts and they DO NOT come off. There are 2520
> > > 7/16"x1 7/8" labels per package & cost is $23.45 per package.
> > >
> > > University Products
> > > 517 Main St
> > > P.O. Box 101
> > > Holyoke, MA 01041-0101On Tue, 28 Apr 1998,
> > >
> > > 1-800-628-1912 or 1-800-762-1165
> > > fax  1-800-532-9281
> > >
> > > Good luck-
> > >
> > > Rebecca D. S
> > >
> > >
> > > teel wrote:
> > >
> > > > ----------------------------Original
> > message----------------------------
> > > > Dear Collagues: Once again, recommendations would be appreciated.
Has
> > > > anyone else experienced slide labels falling off their Gepe mounts?
In
> > > > recent years many of our labels (whether supplied by Labelbase,
Light
> > > > Imptressions, or otherwise) began dropping off our Gepe (plastic)
> > mounts.
> > > > We suspected this was due to the atmosphere of the small room which
> > > > contained our Multiplex slide cabinet & a photocopier. When a door
to
> > this
> > > > room could not be left open for ventilation, the room became hot &
dry
> > from
> > > > the photocopier. Previously, the old glass mounts had suffered more
> > from
> > > > moisture entrapment. The only slides not loosing labels seemed to
be
> > the
> > > > oldest mounts where the labels were painted on with a clear mixture
> > > > (Elmer's glue?). Insights as to possible causes & resolutions would
be
> > > > greatly appreciated. Sincerely,
> > > >
> > > > Rebecca D. Steel, Librarian
> > > > Kalamazoo Inst. of Arts Library
> > > > 314 S. Park St.
> > > > 97-98 temp. address: KIAnnex, 458 W. South St.
> > > > Kalamazoo, MI  49007-5102
> > > > (616) 349-7775
> > > > FAX: 349-9313
> > > > email: <a href="/scripts/wa.exe?LOGON=A3%3Dind9805%26L%3DARLIS-L%26E%3D7bit7BIT%26P%3D30927%26B%3D--%26T%3Dtext%252FplainTEXT%252FPLAIN%3B%2520charset%3DUS-ASCII%26pending%3D" target="_parent" >[log in to unmask]</a>
> > > > http://www.kia.iserv.net
> > > >
> > >
> > > Peggy
> > >
> > >
> >
****************************************************************************

> > ***
> > > Peggy B. Ottens, Slide Curator               ph: 717-245-1374
> > > Fine Arts Department                         fax: 717-245-1937
> > > Dickinson College
e-mail:<a href="/scripts/wa.exe?LOGON=A3%3Dind9805%26L%3DARLIS-L%26E%3D7bit7BIT%26P%3D30927%26B%3D--%26T%3Dtext%252FplainTEXT%252FPLAIN%3B%2520charset%3DUS-ASCII%26pending%3D" target="_parent" >[log in to unmask]</a>
> > > P.O. BOX 1773
> > > Carlisle, PA 17013-2896
> > >
> >
****************************************************************************

> > ***
> >
>
> Peggy
>
>
****************************************************************************
***
> Peggy B. Ottens, Slide Curator               ph: 717-245-1374
> Fine Arts Department                         fax: 717-245-1937
> Dickinson College                            e-mail:<a href="/scripts/wa.exe?LOGON=A3%3Dind9805%26L%3DARLIS-L%26E%3D7bit7BIT%26P%3D30927%26B%3D--%26T%3Dtext%252FplainTEXT%252FPLAIN%3B%2520charset%3DUS-ASCII%26pending%3D" target="_parent" >[log in to unmask]</a>
> P.O. BOX 1773
> Carlisle, PA 17013-2896
>
****************************************************************************
***